Skip to end of metadata
Go to start of metadata

GENIVI 7.0.4 (Intrepid)

Software Base

  • Yocto Project (Dizzy)
    • Linux Kernel 3.14.19

Layer Dependencies

URI:git://git.yoctoproject.org/poky
branch:dizzy
revision:df87cb27efeaea1455f20692f9f1397c6fcab254
URI:git://git.openembedded.org/meta-openembedded
branch:dizzy
revision:9efaed99125b1c4324663d9a1b2d3319c74e7278

Supported Hardware

The following hardware platforms are supported:

QEMU (ARMv7) —emulated machine: vexpressa9
QEMU (IA-32) —emulated machine: qemux86
QEMU (x86-64) —emulated machine: qemux86-64


Check out the baseline for building

% mkdir $HOME/genivi-baseline
% cd $HOME/genivi-baseline
% git clone git://git.yoctoproject.org/poky
% cd poky; git checkout df87cb27efeaea1455f20692f9f1397c6fcab254; cd -
% git clone git://git.openembedded.org/meta-openembedded
% cd meta-openembedded; git checkout 9efaed99125b1c4324663d9a1b2d3319c74e7278; cd -
% git clone https://github.com/GENIVI/meta-ivi.git
% cd meta-ivi; git checkout 7.0.4; cd -

How to build and run?

Build and run a QEMU image including GENIVI P1 components from source

You can build and run a QEMU image including GENIVI P1 and some P2 components using the steps provided in the README.md from the meta-ivi 7.0.4 tag.